Acculaim Dyna Drum HO, User Manual

Page: 6 / 20

4
Installation
Mounting the unit
Each Dyna Drum HO fixture includes a sturdy yoke mount with multiple holes in its base
for various fixing options. Dyna Drum HO fixtures weigh 30lbs (13.6Kg) - ensure that the
mounting surface and the fixings used are sufficiently rated for the task (including wind
shear forces).
Safety wire
anchor hole
IMPORTANT: When mounting a Dyna
Drum HO fixture off ground, ensure
that a safety wire (with a SWL rating
of at least 30lbs (13.6Kg)) links the
anchor hole at the rear of the Dyna
Drum HO with a suitably sturdy
secondary fixing point.
The yoke adjusters on each side of the
Dyna Drum HO require a 5/16” (8mm)
hex key to focus the fixture.
A useful angle chart is provided on each
side to assist with initial adjustment.
Use a 5/16” or
8mm hex key
Angle chart
When installing each Dyna Drum HO fixture, ensure that the surface
is level and that nothing is protruding to damage the mounting
yoke. The yoke has three mounting holes and is designed to be
surface mounted. Approved mounting surfaces include steel,
aluminum, concrete or wood structures. Bolts or screws (not
supplied) should be suitable for the surface and ensure a secure
mount for the fixture.