12
Selecting and displaying a static color
Note: Static colors are only possible on Dyna Drum HO color models.
You can choose from a preset palette of static colors or mix your own. In order to view the
static color, you will need to ensure the following:
•
The
SoLo
behavior mode is set to the
IntL
option.
•
There is no external DMX control input.
To choose a static color
1 Enter the user menu (see page 8).
2 Select the
CoLo
menu item. The current color setting will be shown (e.g.
CL 1
,
CL32, nAnu
,
etc.).
3 Either:
•
Use the and buttons to scroll through the existing color palette options (
CL 1
to
CL32
) and press
ENTER
to save, or
•
Use the
nAnu
(manual) option to mix your own color:
4 Use the and buttons to display the
nAnu
option and press
ENTER
.
5 Use the and buttons to change between the four emitter colours (
red
,
Gree
,
bLue
and
U-A
(white)). To edit a color, press
ENTER
and then use the and buttons to
adjust the level for that color, between 0 and 255. Press
ENTER
to save and exit the setting.
6 Repeat step 5 for each required color.
The chosen color will be shown once the fixture exits from the menu, providing the
conditions mentioned above are met.
Selecting and displaying a dimmed white
This section is applicable only to Dyna Drum HO white models.
You can set a dimmed white that will be shown providing the following conditions are met:
•
The
SoLo
behavior mode is set to the
IntL
option.
•
There is no external DMX control input.
To set a dimmed white
1 Enter the user menu (see page 8).
2 Select the
CoLo
menu item and then select the
dInn
(dimmer) option. The current
intensity setting will be shown.
3 Use the and buttons to set the output intensity to the required level, between 0
and 255.
4 Press
ENTER
to save.
The chosen output will be shown once the fixture exits from the menu, providing the
conditions mentioned above are met.
Summary of Contents for Dyna Drum HO
Page 1: ...Dyna Drum HO Dyna Drum HO QW User guide...
Page 2: ......
Page 20: ...www acclaimlighting com...
