Acculaim Dyna Drum HO, User Manual

Page: 15 / 20

13
Setting the DMX address
When external control is used, the DMX start address of the fixture needs to match the start
address being used by the controlling device. Color fixtures use four DMX channels (for Red,
Green, Blue and White), beginning with the one chosen here; white-only models use just
one DMX channel.
To set the DMX address
1 Enter the user menu (see page 8).
2 Press
ENTER to choose the
Addr
item.
3 Use the and buttons to choose a start address from 1 to 512.
Note: Do not set a DMX address higher than 509 for color models.
4 Press ENTER to save. The DMX start address is now fixed.
Note: When a valid DMX input is attached to the Dyna Drum HO fixture it will override any
internal color/chase settings; additionally, the user display will show the configured DMX address.
Setting the keylock
The keylock can help to deter unauthorized access to the menu by requiring a passcode
number to be entered. Two menu items are used to configure the keylock:
LoC
and
PASS
.
Note: Be sure to set the
PASS
option before enabling the
LoC
so that you know the code.
To set the keylock
1 Enter the user menu (see page 8).
2 Select the
PASS
menu item.
3 Use the and buttons to choose a passcode number between 0 and 9999.
4 Press
ENTER to save.
5 Select the
LoC
menu item.
6 Use the or button to choose the
on
option.
7 Press ENTER to save. The keylock is now active.
Note: To deactivate the keylock feature, enter the
Loc
menu item and choose the
oFF
option.
To enter the menu when keylock is enabled
1 When you enter the user menu and keylock is enabled, the display will show
0
.
2 Use the and buttons to display the previously set passcode number.
3 Press
ENTER . If the entered passcode is correct, the menu will show
ADDr
; if not, it will
return to show
0
so that you can try again.
To gain backdoor access if the passcode is unknown
The backdoor passcode is
123
. If your passcode is unknown or forgotten, use the method
above but enter
123
and press ENTER to gain access.