Acculaim Dyna Drum HO, User Manual

Page: 12 / 20

10
Allows you to set the DMX start address for this fixture. This fixture uses one
DMX channel as chosen here. See page 13.
Displays the current firmware version for the fixture. No changes are possible
within this entry.
Displays the ‘Fixture Hours’ or total operating time (in hours) since the fixture
was manufactured.
Displays the current internal temperature of the fixture (in degrees
Centigrade).
Determines whether the menu display should remain on when the fixture is
in standby mode.
Performs an auto test so you can check that all emitters are operating
correctly.
Inverts the menu display so that it reads correctly when the fixture is inverted.
See page 14.
Enables the keylock feature to restrict access to the menu. Note: Be sure to set
the lock number within the
PASS
entry before changing this option to
on
.
See
page 13.
Allows you to set a password number between
0
and
9999
for use when the
Loc
feature is enabled. See page 13.
Determines fixture solo behavior for when there is no external control input.
Options are:
IntL
- displays static white.
bLnd
- blacks out the emitters if control
is lost.
LASt
- retains last state if control is lost. See page 11.
Allows you to choose an intensity setting using the
dInn
(dimmer) option.
This output will be shown when the
SoLo
>
IntL
option is set and the fixture
does not have an external control input. See page 12
Determines the wireless channel that should be used when the optional
wireless control system is fitted. Reserved for future use.
Main menu items (Dyna Drum HO single color models)