Acculaim Dyna Drum HO, User Manual

Page: 17 / 20

15
Further information
Troubleshooting
No light output is visible when expected.
•
Check that power is correctly applied to the fixture and that there is no damage to the
power input cord.
•
Use the menu to perform an emitter test.
•
Use the menu to check the internal temperature of the fixture.
•
If external DMX control is being used, check that the DMX address set within the fixture
matches that being output by the controlling source device.
•
If external DMX control is being used, check the DMX output near to the source to
confirm a valid signal is being originated. When a valid DMX input is attached to the Dyna
Drum HO fixture, the user display will show the configured DMX address.
•
If external DMX control is being used, check that the DMX + (hot) and DMX - (cold) lines
have not been crossed.
•
If solo mode is being used, check that the static color, white-only output or color chase
has been correctly programmed and that the appropriate solo mode is selected (see
pages 11 and 12).