Connecting the Balance/Scale to AC Power/Safety Precautions
Use only original Acculab AC adapters:
– for Europe: 6971948
– for the RSA: 6971949
– for the U.S.: 6971947
– for Australia: 6971950
§
Insert the right-angle plug into the jack
§
The AC adapter rated to Class 2 can be plugged into any wall outlet without
requiring any additional safety precautions
The ground is connected to the balance/scale housing, which can be additionally
grounded for operation.
Using a Non-Rechargeable/Rechargeable Battery
(for models ALC-810.2, ALC-2100.1, ALC-4100.1 and ALC-6100.1)
$
A non-rechargeable or rechargeable battery is not included with the equipment
supplied
!
Use only a commercially available non-rechargeable or rechargeable
9-volt battery
!
When using a rechargeable battery, always use an external charger to recharge
the battery
§
Lay the balance/scale on its side
§
Open the battery compartment: Lift the compartment cover
§
Insert the 9-volt (rechargeable) battery in the compartment
$
Make sure to connect the positive and negative poles correctly
!
All used batteries are classified as waste that requires special handling (not
“household” waste). Dispose of rechargeable batteries in accordance with the
applicable special waste disposal regulations.
§
Close the battery compartment: Press down on the cover until it clicks into place
6
www.balances.com is your Acculab deep discount distributor
