Acculab ALC series, Operating Instructions Manual

Page: 22 / 29

Error Codes
Error codes are shown on the main display for approx. 2 seconds, after which the program automatically returns to the weighing mode.
Display Cause Solution
No segments appear No AC power is available Check the AC power supply
on the display The AC adapter is not plugged in Plug in the AC adapter
Battery is dead Replace the battery
Recharge the battery using an external charger
h
The load exceeds the balance/scale capacity Unload the balance/scale
l
The weighing pan is not in place Place the weighing pan on the balance/scale
Something is touching Move the object that is
the weighing pan touching the weighing pan
e 01
Display capacity exceeded: Decrease the weight on the balance/scale
Value to be output cannot
be shown on the display
e 02
Calibration parameter Calibrate only when zero
requirement not met; e.g.: is displayed
– balance/scale not zeroed Press [ZERO] to zero the balance/scale
– balance/scale is loaded Unload the balance/scale
e 09
When gross value
<
zero, no tare Tare the balance/scale
e 10
The [ZERO] key is blocked when Press [CAL] to clear the tare memory and release
there is data in the second tare the tare key
memory (net-total) – only 1 tare
function can be used at a time
e 11
Value input is not allowed for Press [ZERO]
second tare memory
e 22
Weight is too light or there is Increase the reference quantity
no sample on the balance/scale or sample amount
e 30
Interface port for printer output is blocked Contact your local Acculab Service Center
Max. weighing capacity The balance/scale was Place the weighing pan on the
is less than indicated turned on without the balance/scale and press [ON/OFF] to
under “Specifications” weighing pan in place turn the balance/scale back on
The weight readout The balance/scale has not Calibrate/adjust the balance/scale
is obviously wrong been calibrated/adjusted
The balance/scale was not
Tare before weighing
tared before weighing
If any other errors occur, please contact your local Acculab Service Center.
22
www.balances.com is your Acculab deep discount distributor