AccuEnergy AcuDC 241, User Manual

Page: 41 / 70

33
1
st
screen: AO1 parameter setting. Three options: 0 , volage; 1,
current ; 2 , power. Press "F" key to select. Press “V/A” to go to
the next screen. The figure shows AO1 is set as current.
Note: 241 and 242 meter do not have this screen. AO1 is set
as what is being measured.
2
nd
screen:AO1 lower limit setting. Range:“0.00 - 1.00”. There
is no "sign" digit when the limit is 0. When the limit is not 0,
"sign" digit will be visible, the sign can be adjusted by moving
the cursor to the digit. Press “F” and “V/A”to edit the vaule.
Press “V/A”at the last digit to confirm and go to the next
screen.
The figure shows the lower limit is 0%.
3
rd
screen: AO1 upper limit setting. Except"-100% - +100%",
all the other upper limit's absolute value cannot be smaller
or equal to the lower limit's. Under no circumstance can the
upper limit be 0. Press “F” and “V/A”to edit the vaule. Press “V/
A”at the last digit to go to the next screen.
The figure shows the upper limit is +100%.
Figure
3-22
AO1 parameter setting
Figure 3-23 AO1 lower limit setting
Figure
3-24
AO1 upper limit setting