AccuEnergy Accuvim II, User Manual

Page: 26 / 58

0
Ethernet Modual
i) Set Modbus/TCP port in the seventh setting page, such as 502. Press
“V/A” key, go to setting state. Users may set parameter in the pointed
area, and cursor starts at the first digit bit. After setting Modbus/TCP
port completely, press “V/A” key to affirm. Again press “P” key, go to
the eighth setting page for HTTP port. Modbus/TCP port’s default value
is 502, and the user defined range of port is 2000~5999. If the set port is
not in the range, the set port will return default value.
Figure 3-11