31
7. Error Codes (cont.)
Detection Error Codes
ERROR
CAUSE
SOLUTION
D01
Abnormal Length
Pass the bill one more time. If the
error persists, try to pass the bill in a
different orientation.
Make sure the bill is in good
condition. (See section 5.2 for more
information)
Clean the sensors. (See section 5.6 for
more information)
D02
Suspicious MG Sensitivity
D03
Suspicious IR-1 signal
D04
Suspicious UV-1 Signal
D05
Suspicious IR-2 signal
D06
Suspicious IR-3 signal
D07
Suspicious IR-4 signal
D08
Suspicious UV-2 signal
Count Error Codes
ERROR
CAUSE
SOLUTION
C01
Bill Entrance Error
Place the banknotes correctly in the
bill entrance tray, align properly using
the bill guider.
C02
Count Sensor # 0 Error
C03
Count Sensor # 1 Error
C04
Emergency Stop
Remove the bill from the tray and
place them again.
