23
5. Troubleshooting and Maintenance (cont.)
5.2 Preventive Measures
To maintain optimal performance of the detector, please note the
following:
1.
Avoid direct exposure to powerful sources of light as well as magnetic
interference (e.g. microwaves, cell phones, or Wi-Fi equipment), which
will affect the sensors of the detector.
2.
Keep the sensors clean.
3.
Keep the equipment off when it is not being used for a long period of
time.
4.
To avoid jamming, please:
-
Ensure there are no foreign objects that could accidentally fall into
the equipment (clips, adhesive tape, or others).
-
Make sure to position the bills correctly before inserting them into
the feeding channel. See section
3.6 Bill Positioning
-
Make sure the bill is in good condition, following the suggestions
below.
5.
Check the status of the bills and avoid processing the following:
-
Bills with staples
-
Bills with adhesive tape, or other glue
-
Bills that are ripped or badly damaged
-
Bills that are wet
-
Bills affected by chemical agents of any kind
Note:
A new stack or bundle of bills should be fanned before counting to
make sure no bills are stuck together.
