17
4. Control Panel (cont.)
•
BATCH / BACK:
Used to activate batch count selection and to move
back through the User Menu. Press the button to activate the batch
function and set the quantity. The default number of pieces is 100.
Press the or buttons to increase or decrease the number by
+/- 10.
Press the or buttons to increase or decrease the number by +/-
1. After selecting a value for the counting batch, the counting will stop
after reaching the number of pieces in the preset batch. The batch
icon will light up green when the function is activated.
•
MODE:
Used to select between operating modes. Press sequentially
to select the desired operating mode.
1.
MIX:
Verify and count mixed denominations of the programmed
currencies. The result is the total amount of money as well as the
number of bills counted.
2.
SORT:
In this mode, the unit memorizes the first denomination
scanned, then compares the rest of the bills with this
denomination. When a different denomination is found, the unit
will stop counting to allow the user to remove the bill. As a result,
all bills will sort into the same denomination.
3.
COUNT:
Used for a simple count of the bills in a stack. In this
mode, the unit does not verify any security features of the
banknotes or recognize the denomination. The final result will
only have the number of bills counted. It is highly recommended
to separate the different denominations before counting. The
total value of these bills would have to be manually calculated by
the user.
•
:
Navigation keys.
