29
6. Software Updates
To install new software, follow these steps:
www.accubanker.com/pages/Support-D700
software update is available. If there is a new update, download
and copy the programming software to a microSD card (16GB or
less).
2. Turn off the equipment.
3. Insert the microSD card into the upgrade port on the right side of
the detector.
4. Turn on the detector and wait until it finishes restarting the
equipment.
5. Press the MENU key and use the navigation keys to scroll and
select Software Update.
6. Press “OK” to start the software update. The update will begin to
install, and the process will take approximately one to two
minutes.
7. At the end of the update, the equipment will confirm if the
process was successful, and then you can remove the microSD
card.
