27
5. Troubleshooting and Maintenance (cont.)
5.5 Maintenance
CAUTION:
Before performing any cleaning procedure, turn off
the equipment and unplug it. Please note: problems or defects
caused by lack of maintenance are not covered under the
warranty.
Avoid keeping and operating the machine in dusty rooms and without
adequate hygienic conditions. It is necessary to clean the interior of the
unit once a month or more, depending on the use. Turn off and unplug
the machine before proceeding with this operation.
5.6 Cleaning the Magnetic Heads and IR Sensors
1. Turn off the equipment and open the detection channel module
using the opening latch to access the sensors.
2. Use the brush to remove the dust and, if possible, use compressed air
for the best results.
3. Use an alcohol swab to remove dirt on the magnetic heads.
