13
5. Operation (continued)
5.2 Miscounting errors
If the unit is not counting accurately:
-
Ensure that the banknotes are placed orderly in the hopper.
-
Clean the dust or any other kind of dirt from the counting sensors.
-
Evaluate the bill thickness. Adjust the mechanism as needed to improve
the unit’s performance.
-
If MG errors or UV errors are reported often, proceed to verify the
sensitivity, and consider reducing them in case the sensitivity is too high.
5.3 Setting the unit up for counting Polymer bills
-
Press and hold the ADD key and turn the unit ON. The unit will boot up
in the Settings Menu.
-
Press the BATCH key sequentially until reaching the P 10 (Ho)
parameter.
-
Use the “+” key to set it up to Ho-1 for counting Polymer bills or use the
“-” key to set it up to Ho-0 if necessary.
-
Press START to save the change and return to the counting screen.
NOTE:
Polymer bills with transparent windows might provoke counting
errors depending on the location of the transparent windows inside the bill.
