14
5. Operation (continued)
5.4 Thickness Knob Adjustment
Proceed with this calibration when the bills are not fed smoothly through the
machine or miscounting errors are occurring frequently.
-
The Thickness Adjustment Knob is set at 0 (at the center). This is the
standard setting from the factory.
-
Having the correct thickness adjustment knob position will ensure a
smooth counting as well as a trouble-free operation.
-
Trial and error attempts are recommended before you make the final
adjustment.
a.
For new (thinner) bills, adjust toward "-" to reduce the gap.
b.
For used (thicker) bills, adjust toward "+" to increase the gap.
c.
Small adjustments towards the "+" direction work best.
5.5 Emergency Stop button
The emergency stop button is a safety feature that immediately stops the
equipment from performing any operations when pressed.
If the emergency button is pressed, the equipment must be turned OFF and
ON again to resume the counting operation.
