7
2. Installation
A)
Unpacking the unit
After unpacking the unit, store the box and the packing material for future
shipping. Failing to ship the unit in its original unit box and styrofoam will
void the unit’s warranty.
B)
Installation
Select an appropriate workspace and make sure it is clean, flat, and leveled.
The unit should never be placed near or over a radiator, heater register, or
close to a strong source of light.
Voltage operation range: 100 - 240VAC 60/50 Hz
Plug the power cable to the back of the unit and into the electric power outlet.
Turn the unit on and verify it is working. In case of any functioning
problems, contact your provider immediately.
Note:
When replacing fuses, make sure to use the same type and rating.
