11
4. Equipment Overview (continued)
4.2 Sensitivity Adjustment of the Counterfeit detection functions,
(MG-UV-DD-LEVEL)
The user has the option to adjust (increase or decrease) the sensitivity of the
counterfeit detection functions based on their specific needs and the bills’
condition.
To modify these setting values, press and hold the specific function for 3
seconds until the display shows the current value for the selected function.
Next, proceed to INCREASE or DECREASE the current value using the + &
- keys until reaching the desired sensitivity value. Press START to validate
the selection and return to counting mode.
The sensitivity can be adjusted from 1-9 where 1 is the lowest sensitivity and
9 the highest sensitivity.
NOTE:
If the unit is reporting error messages related to the UV, and MG
functions (UUE or MGE) often, verify the sensitivity settings for these
functions in case they are too high. That could affect the unit’s performance.
