Accu-Steam EG24A, Installation & Operator'S Manual

Page: 32 / 48

Accu-Steam™ G2 Electric Installation and Operators Manual
MP5018-1702
PAGE 29
OPERATION
Weighted Temperature Probe
Digital Temperature Reading Device
Fig. 9
Do not use an infrared or a mechanical temperature
gauge to measure the surface temperature of
the appliance as it will not be accurate and will
provide a false temperature reading of the cooking
surface temperature. See Fig. 9 for proper surface
temperature measuring tools.
Grease Container
The grease container is located on the front right
side of the appliance and has a gripping handle
on the front and the inside middle to assist in
safely managing the hot contents. Models used
for maritime have a locking style and this lock
must be released before sliding the drawer out.
Use caution when emptying the grease pan as
contents in this container could cause severe
burns. The grease container should be checked
periodically and emptied as necessary to prevent
an overflow or dangerous condition. To assist
in indicating an overfill condition a hole located
on the front of the container will allow grease to
escape when overfilled.
T
he grease can contents could cause severe burns. Slowly remove the grease
container from the appliance to avoid spilling the contents.
Allow the grease container contents to cool
below 140°F before removing. Be careful not
to spill the contents of the grease container
as it can cause a slipping condition which
could cause a personal injury
WARNING
WARNING
NOTE
A number of factors can cause surface temperature reading differences such as:
• Air movement across the appliance cooking surface can lower the temperature reading
as much as 10° F from the set temperature.
• Proper calibration of the temperature measuring device.
• How long after the heat light turned off before temperature measurement was completed.
NOTE