EXI-600 INVERTED MICROSCOPE SERIES
ACCU-SCOPE
®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
46
11.
MAINTENANCE
1.
Use gauze to gently wipe glass components. If you need to remove fingerprints and oily residue,
slightly dampen the gauze first with a mixture of alcohol and diethyl ether (3:7) or dimethylbenzene
before wiping.
Diethyl ether and alcohol are both extremely flammable. DO NOT get them near open flames
or any electrical components such as power switches. Always use these chemicals in well
ventilated rooms.
2.
Do not use organic solvents to wipe any non-optical components. If you want to clean these
components, use a soft, dust-free cloth, moisten with a neutral cleaner in water, and wipe.
3.
If the microscope is wet by liquid during operation, immediately turn off the power supply before
cleaning up the liquid.
4.
Do not disassemble any microscope components. This will immediately void any warranty and the
performance and function of the microscope may be affected.
5.
If not filling every position on the nosepiece with an objective, ensure that dust covers are installed in
the unoccupied positions to prevent dust from entering the microscope body and collecting on other
optics and components.
6.
Cover the microscope with a dust cover when not in use. Wait until the lamp house cool before
covering the microscope with the dust cover.
7.
Any repair or replacement of components of this product should be executed by our company or an
authorized ACCU-SCOPE service provider.
