C
HAPTER
1
| Introduction
Hardware Description
– 20 –
Figure 5: Connecting the RG211
T
O
CONNECT
THE
RG211:
1.
Power on the RG211 by connecting the AC power adapter and plugging
it into an AC power source.
C
AUTION
:
Use ONLY the power adapter supplied with the RG211. Otherwise,
the product may be damaged.
2.
Observe the Indicator LEDs. When you power on the BreezeMAX Si,
verify that the Power LED turns on and that the other LED indicators
start functioning as described under
.
3.
Connect Category 5 or better Ethernet cables from the RG211’s LAN
ports to the network ports of your PCs. Alternatively, you can connect
the LAN ports to an Ethernet switch or other devices. Make sure the
length of each cable does not exceed 100 meters (328 ft).
4.
If your PCs are powered on, the RJ-45 LAN port LED on the RG211
should turn on to indicate valid links.
Summary of Contents for RG211-2.3G
