Accton Technology RG211-2.3G, User Manual

Page: 18 / 84

C
HAPTER
1
| Introduction
Hardware Description
– 18 –
LED I
NDICATORS
The RG211 includes an array of status LED indicators, as described in the
following figure and table.
Figure 4: LEDs
Table 2: LED Behavior
LED Status Description
Power Off
The AP has no power.
Yellow
The AP is receiving power.
LAN Off Ethernet RJ-45 has no valid link.
Blue
Ethernet RJ-45 has a 1000 Mbps link. Blinking indicates
network activity.
Green
Ethernet RJ-45 has a 100 Mbps link.
Blinking indicates
network activity.
Amber
Ethernet RJ-45 has a 10 Mbps link. Blinking indicates
network activity.
VoIP Off
The VoIP function is disabled.
Green
The VoIP function is enabled.
WiMAX Signal
Strength
(1~7)
All Illuminated
The unit is receiving a full WiMAX signal from a
transmitting base station.
Partial
Illumination
The unit is receiving a reduced WiMAX signal from a
transmitting base station.
Single
Illumination
The unit is receiving a low WiMAX signal from a transmitting
base station.
Power
VoIP WiMAX Signal
Strength Indicators
LAN
Link/Activity