Accton Technology RG211-2.3G, User Manual

Page: 19 / 84

C
HAPTER
1
| Introduction
Hardware Description
– 19 –
E
THERNET
P
ORTS
The unit has one to four 10/100-BASE-TX RJ-45 ports (depending on
model) that can be attached directly to 10BASE-T/100BASE-TX LAN
segment.
This port supports automatic MDI/MDI-X operation, so you can use
straight-through cables for all network connections to PCs, switches, or
hubs.
The unit appears as an Ethernet node and performs a bridging function by
moving packets from the wired LAN to remote workstations on the wireless
infrastructure.
V
O
IP P
HONE
P
ORTS
The RG211 provides a maximum of two RJ-11 telephone ports that connect
directly to a standard (analog) telephone set. This allows a regular
telephone to be used for making VoIP calls over the Internet.
P
OWER
C
ONNECTOR
The unit does not have a power switch. It is powered on when connected to
the AC power adapter, and the power adapter is connected to a power
source. The power adapter automatically adjusts to any voltage between
100~240 volts at 50 or 60 Hz, and supplies 12 volts DC power to the unit.
No voltage range settings are required.
R
ESET
B
UTTON
This button can be used to restart the RG211.
C
ABLE
C
ONNECTIONS
The RG211 is a plug-and-play device, so once it has been connected to
your PC and powered up, it is fully operable.
Functioning as a gateway, the unit routes traffic between a WiMAX network
and PCs or notebooks in the local network.