C
HAPTER
2
| Installing the RG211
Mounting on a Wall
– 24 –
M
OUNTING
ON
A
W
ALL
To mount on a wall follow the instructions below.
Figure 7: Wall Mounting
The RG211 should be mounted only to a wall or wood surface that is at
least 1/2-inch plywood or its equivalent. To mount the RG211 on a wall,
always use its wall-mounting bracket. The RG211 must be mounted with
the RJ-45 cable connector oriented upwards to ensure proper operation.
1.
Mark the position of the three screw holes on the wall. For concrete or
brick walls, you will need to drill holes and insert wall plugs for the
screws.
2.
Insert the included 20-mm M4 tap screws into the holes, leaving about
2-3 mm clearance from the wall.
3.
Line up the three mounting points on the AP with the screws in the wall,
then slide the AP down onto the screws until it is in a secured position.
Mounting Slots
Summary of Contents for RG211-2.3G
