Swimming Pool Heat Pump – S series
HOW TO USE THE HEATING MODE
CAUTION: Before you begin, make sure the filter pump is in a state ofoperation.
Step 1: Press
once to turn on your pump.
Step 2:Press
to select from one mode to the other until you see the Heatling mode.
Step 3: Use
or
to select the desired temperature (15-40° C).
Example
If you chose the value 27 ° C, the screen will display:
Once the symbol
stops flashing, there quested
temperature will be validated and
up to the temperature of the water
current (in our example 25 °).
Your screen will display:
Good to know about the operation of the heating mode
When the temperature of the incoming water is less than or equal to the required
temperature -X ° C, the compressor will start in heating mode. The compressor stops
when the temperature incoming water is greater than or equal to the required temperature
+ Y ° C.
Directions for setting range X and Y
X: parameter adjust from 2 ° to 10 ° C, the default setting is 3 ° C
Y: parameter adjust from 0 ° to 6 ° C, the default setting is 0 °
Flash
Requested temp.
Current water temp.
Current ambient temp.
Operation and Installation Manual
16
2016/02
Summary of Contents for S Series
Page 37: ...Swimming Pool Heat Pump S series Operation and Installation Manual 3 2016 02...
Page 38: ...NOTES...
Page 39: ...NOTES...