Swimming Pool Heat Pump – S series
wired control
2)
Wired control damaged
3)
Main PCB damaged
between controller and PCB
2) Replace the controller
3) Replace the main PCB
Maintenance & Troubleshooting
Parameter checking and adjustment
The system parameters can be checked and adjusted via the controller. But they should
not be changed casually, especially by house owners.
This operation is reserved to facilitate future service and maintenance. All parameters
should not be changed casually, especially by house owners!
How to check and adjust parameters:
Step 1long press
more than 6 seconds to enter parameter checking mode.
Step 2: short press
to chose parameter that needs adjusting .
Step 3:press
to start parameter setting and the parameter flashes.
Step 4:press
and
to adjust the value
Step 5:press
to confirm the value
Step 6:press
and
to return to normal display.
Operation and Installation Manual
28
2016/02
Summary of Contents for S Series
Page 37: ...Swimming Pool Heat Pump S series Operation and Installation Manual 3 2016 02...
Page 38: ...NOTES...
Page 39: ...NOTES...
