![background image](http://html1.mh-extra.com/html/accorroni/s-series/s-series_operation-and-installation-manual_3764466012.webp)
Swimming Pool Heat Pump – S series
Controller Operation
MIN
ON
OFF
IN
SET
VALVE
OUT
ROOM
NO.
M
Introduction for the keys
ON/OFF
Press it to switch on or off heat pump.
MODE SELECTION
Press it to select the mode. The sequence is: automatic-cooling -heating.
During parameter setting, press it to adjust parameters;
During clock and timer setting, press it to choose the hour value or minute value.
UP AND DOWN
Press them to adjust the value of water temperature, clock, timer, parameters;
During failure checking and p arameter checking, press any of them to exit
checking.
SETTING AND CONFIRM
Long press it for more than 6 seconds, you can check and adjust the parameters.
Press the UP/DOWN key to exit operation.
When a failure occurs, press it for no more than 2 seconds, you can check the
failure code. Press it again you can check the other failure code if more than one
occurs. Press the UP/DOWN key to exit checking.
CLOCK AND TIMER KEY
Press it to set clock and timer. Detailed operation will be described in following
pages.During parameter setting, press it to change the rolling direction of
parameters.
Operation and Installation Manual
11
2016/02
Summary of Contents for S Series
Page 37: ...Swimming Pool Heat Pump S series Operation and Installation Manual 3 2016 02...
Page 38: ...NOTES...
Page 39: ...NOTES...