![background image](http://html1.mh-extra.com/html/accorroni/hpe-35/hpe-35_technical-information_455706005.webp)
5
The manual of “
HPE INVERTER
” units collects all the necessary information for the better use of the appliance under the
operator’s safety conditions which meets the requirements listed in the 2006/42/CE Equipment Directive and following
amendments.
1
PURPOSES AND CONTENTS OF THE MANUAL
This manual provides the basic information as for the selection, installation, operation and maintenance of i-HP units. It
is addressed to the installer and the user of the appliance and it includes the necessary indications allowing the user to operate
the unit efficiently, even without any previous specific knowledge of it.
The manual describes the characteristics of the appliance at the time of its marketing; therefore, it must be considered adequate
respecting the state of the art in terms of potentiality, ergonomics, safety and functionality.
The company introduces also technological improvements and is not constrained to update the manuals for previous versions
of appliances that could not be compatible. So make sure to use, for the installed unit, the supplied manual.
It’s recommended that, the user must follow the instructions contained in this booklet, especially those concerning the safety and
routine maintenance.
1.1
CONSERVATION OF THE MANUAL
The manual has to be always kept for future reference. It has to be stored in a safe place, away from dusts and moisture. It has to
be also available and accessible to all users who shall consult it any time they are in doubt on how to operate the equipment. The
company reserves the right to modify its products and related manuals without necessarily updating previous versions of the
reference material. It declines also any responsibility for possible inaccuracies in the manual if due to printing or transcription
errors.
The customer must keep any updated copy of the manual or parts of it delivered by the manufacturer as an attachment to this
manual.
The company is available to give any detailed information about this manual and to give information regarding the use and
the maintenance of its own units.
1.2
GRAPHIC SYMBOLS
Indicates operations that can be dangerous for people and/or disrupts the correct operation of the equipment.
Indicates prohibited operations.
Indicates important information that the operator has to follow in order to guarantee the correct operation of the
equipment in complete safety.
2
SAFETY LAWS
The units have been designed in accordance with the following directives and harmonised standards:
• EU Directives 2014/68/UE, 2006/42/EC, 2014/35/UE, 2014/30/EU, 2011/65/EU, 2012/19/EU
• UNI EN 378-1, 378-2, EN 12735-1
• UNI EN ISO 12100, EN 60204-1, UNI EN ISO 13857
• CEI EN 61000-6-3, IEC 61000-6-2.
3
PERMITTED USES
•
The company excludes any contractual and extra-contractual liabilities for damages caused to persons, animals or objects, by
incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the
information contained in this manual.
•
These units have been designed only for heating and/or cooling of water. Any other use not expressly authorized by the
manufacturer is considered improper and therefore not allowed.
•
The location of the plant, the hydraulic and electrical circuits must be established by the planting designer and must take into
account both technical requirements as well as any applicable local laws and authorized specifications.
•
The execution of all works must be performed by skilled and qualified personnel, competent in the existing rules in different
countries.
The execution of all works must be performed by skilled and qualified personnel and competent in the existing rules in the
country in which the appliance will be installed.