background image

7

www.acclaimlighting.com

DMX PERSONALITY MODE SELECTION

AL Cove DMX models have numerous modes of operation which are determined by the 
DMX Personality setting. The various personality settings and their effects on the emitters for 
each model type are listed here:
 

Settings 

1’ models 

4’ models

  001 DMX 8RGBW 

2 cells, 4 ch’s each (RGBW) 

8 cells, 4 ch’s each (RGBW)

  002 DMX 8RGB 

2 cells, 3 ch’s each (RGB) 

8 cells, 3 ch’s each (RGB)

  003 DMX 8WWCW 

2 cells, 2 ch’s each (WW + CW)  8 cells, 2 ch’s each (WW + CW)

  004 DMX 8CH 

2 cells, 1 channel each (W) 

8 cells, 1 channel each (W)

  005 DMX 4RGBW 

1 cell, 4 channels (RGBW) 

4 cells, 4 ch’s each (RGBW)

  006 DMX 4RGB 

1 cell, 3 channels (RGB) 

4 cells, 3 ch’s each (RGB)

  007 DMX 4WWCW 

1 cell, 2 channels (WW + CW) 

4 cells, 2 ch’s each (WW + CW)

  008 DMX 4CH 

1 cell, 1 channel (W) 

4 cells, 1 channel each (W)

  009 DMX 2RGBW 

1 cell, 4 channels (RGBW) 

2 cells, 4 ch’s each (RGBW)

  010 DMX 2RGB 

1 cell, 3 channels (RGB) 

2 cells, 3 ch’s each (RGB)

  011 DMX 2WWCW 

1 cell, 2 channels (WW + CW) 

2 cells, 2 ch’s each (WW + CW)

  012 DMX 2CH 

1 cell, 1 channel (W) 

2 cells, 1 channel each (W)

  013 DMX 1RGBW 

1 cell, 4 channels (RGBW) 

1 cell, 4 channels (RGBW)

  014 DMX 1RGB 

1 cell, 3 channels (RGB) 

1 cell, 3 channels (RGB)

  015 DMX 1WWCW 

1 cell, 2 channels (WW + CW) 

1 cell, 2 channels (WW + CW)

  016 DMX 1CH 

1 cell, 1 channel (W) 

1 cell, 1 channel (W)

  017 MANUAL RGBW 

1 cell, reserved for future use 

1 cell, reserved for future use

  018 PROGRAM 

1 cell, color chase 

1 cell, color chase

Note: In each case the ‘cell’ values indicate the number of individually controlled sections the 
fixture is split into.

Using an RDM (Remote Device Management) tool, you can quickly change between the 
various operation modes. Various third party DMX/RDM tools are available; we recommend 
the Acclaim Lighting XMT-350 tool for this task. The chosen mode will determine how many 
DMX channels are required to control the fixture. For instance, 

DMX 8RGBW

 mode on a 4’  

QW model will require 32 (8 x 4) DMX channels to operate. 

(continued)

Summary of Contents for Spectrum AL Cove DMX















Reviews: