6
www.acclaimlighting.com
FITTING A GROUND SPIKE
The optional ground spike kit provides extra flexibility for landscape illumination projects.
When the Dyna Accent Mini is used with the ground spike, the cable must first be removed
from within the pillar.
TO REMOVE THE CABLE FROM THE PILLAR
Note: This procedure must be carried out before any power or
control connections are made.
1 Use a 3/16” (5mm) Allen wrench (hex key) to remove the two
bolts which secure the fixture body to the pillar.
2 Slide the pillar down the cable and detach it completely:
4 With the cable arranged to the appropriate side of the
pillar, align the yoke with the fixture’s mounting holes
and re-insert the two bolts removed earlier.
3 Before re-attaching the pillar, consider how the Dyna Accent
Mini will be tilted once it is installed. To avoid any pinching
of the cable by the yoke (located at the top of the pillar),
arrange the cable to exit either from the front or from the
rear of the pillar:
If the fixture will be tilted up,
arrange the cable so that it exits
at the front of the pillar.
If the fixture will be tilted down,
arrange the cable so that it exits
at the rear of the pillar.
Pillar
Note: The pillar has a standard internal 1/2” NPS pipe thread.
