10
www.acclaimlighting.com
FITTING A SNOOT
For installations where any light spill from the Dyna Accent Mini must be eradicated from a
nearby surface, the optional 1.5” (40mm) snoot is recommended.
Note: If required, a spread lens can be fitted together with the snoot, see page 9.
TO FIT A SNOOT
Note: This operation is best achieved with the Dyna Accent Mini front face lying horizontal.
1 Using a Phillips screwdriver, remove the four screws which secure the front hood to the
main body of the fixture.
2 Place the snoot onto the front face of the fixture and ensure the snoot’s
Drain hole
aligns
with the fixture’s
Drainage recess
.
3 Reintroduce the four screws and tighten sufficiently.
Snoot
Drain hole
Drainage recess
