a task a pop-up window will allow you to choose from the following types:
Console
Control Cues and other elements found on the Console page.
Recorder
Control playback of Recording's and other elements found on the Recorder page.
DMX
Control the DMX channels in the 'Show Control buFer'. This data can be send out via the
DMX ports and/or Art-Net. Please set the 'Output Routing' in the Settings page
accordingly.
MIDI
Send a MIDI message.
OSC
Send an OSC message.
Art-Net
[obsolete, use DMX in stead]
System
Perform miscellaneous tasks like blinking the device's LED.
Action
Trigger another action.
Action List
Control the properties of an Action-list (e.g. Enable check-box).
Timecode
Control the time-code properties like selecting the input source or start/stop the internal
time-code generator.
Variable
[not implemented yet]
UDP
Send a UDP message.
GPI
Trigger the GPI port to read a binary value across all 4 contacts.
Randomizer
Trigger the Randomizer to calculate a new value.
Feature
For each task you can select a Feature. The choice in Features diFers for each Type.
Console features:
Go+
Jump to the next Cue. I f the current cue is number 256 then it will jump to cue 1.
Go-
Jump to the previous Cue. I f the current cue is number 1 then it will jump to cue 256.
Jump
Jump to a speci;c Cue number.
Intensity
Set the Console's master intensity.
Capture from DMX
Record the channel values from the DMX in port and save it in the current Cue. Because
there is only one DMX input this will only save the ;rst 512 channels.
Capture from Art-
Net
Record the channel values from the Art-Net in universes and save it in the current Cue.
Capture from Show
Control
Record the channel values from the 'Show Control DMX buFer' and save it in the current
Cue.
26
