Access Virus TI, User Manual

Page: 79 / 218

79 SOUND PARAMETERS REFERENCE
MATRIX
The modulation matrix is used for custom control routing. Six
sources can be routed to three destinations each. Available
sources include the internal envelopes and LFOs as well as
most MIDI controllers, channel pressure (aftertouch) etc.. The
list of destinations includes almost every Single Mode parame-
ter in the Virus.
DESTINATION
This pair of buttons is used for up-and-down cursor control
within the menu (required because each page displays all three
destinations and amounts at once). Either of the DESTINATION
buttons will open the menu if it is not already open...
SELECT
Opens the modulation matrix menu. If pressed again, moves on
to the next slot (SHIFT + SELECT will move to the previous slot).
Alternative navigation: use the PARAMETERS buttons.
Slot
The information below applies to any slot in the matrix. Use the
DESTINATIONS buttons to move the cursor up and down.
Source
(VALUE 1 knob)
> Off, Pitch Bend ... Random: Specifies the modulation source
(envelopes, LFOs, MIDI controllers etc.). This source can be
simultaneously routed to a maximum of three destinations per
slot.
Amount
(VALUE 2 knob)
> PANEL CONTROLS
> SELECT MENU