Access Virus TI, User Manual

Page: 67 / 218

67 VIRUSCONTROL
LFO Page
Surprisingly enough, this is where you will find the controls for
the Virus TI’s 3 LFO’s.
There are 3 ways in which you can select the waveform for each
LFO:
1) Clicking on one of the buttons depicting the main waveforms
2) Click the name of the waveform and drag vertically
3) Click the picture of the waveform and drag verticallyClock
mode can be enabled either by clicking the ‘Clock’ button, or by
clicking CLK ‘Off’ and dragging vertically.
Clock resolution can be adjusted either by dragging the CLK
value vertically, or by turning the rate dial.
LFO rate or clock resolution can also be adjusted by grabbing
the number displayed within the rate dial and dragging verti-
cally.
LINK button
These buttons link the two adjoined parameters so that their
values synchronise when one or the other is adjusted.
For a full description of any parameter, simply manoeuvre the
mouse pointer over it, and take a look at the Information Bar
along the bottom of VirusControl.
If you wish to learn more about the functionality of a particular
parameter, please refer to the LFO section.