Access Virus TI, User Manual

Page: 128 / 218

128
SINGLE
Switch to SINGLE mode. If the Virus is already in Single mode,
exits any open menu.
SEQ MODE
Via MULTI + SINGLE. Switch to Sequencer Mode. This gives
simultaneous access to 16 Single programs. Similar to Multi
Mode, but there is only one Sequencer mode “program” and
the MIDI channel is always equal to the PART number.
Note: No additional parameters are required – tempo, panning,
MIDI volumes etc. are all handled by the sequencer application.
Just like in Multi Mode, Sequencer Mode data can be transmit-
ted (e.g. recorded into a MIDI sequencer) via Arrangement
dump – see “Transmit MIDI Dump” on page 155.
PARAMETERS / BANK
While any menu is open, use these buttons to scroll through
individual pages (or parameters – see “Navigation” on
page 163). These buttons also move the cursor while naming
programs (see “STORE” on page 125).
If no menu is open, they are used to change the current bank.
VALUE / PROGRAM
While a menu is open, these buttons decrement/increment the
currently active parameter. If no menu is open, they step
through programs within the current bank.
The master EDIT button to the left of the display opens a menu
giving access to all parameters which are not specific to any
particular section, but (unlike configuration parameters) are still
stored within each program.
Common
> EDIT MENU