Access Virus TI, User Manual

Page: 135 / 218

135 SOUND PARAMETERS REFERENCE
Name Cat 1, Name Cat 2
> Off, Acid ... Favourites 3: Select Category names. As certain
sounds could conceivably belong to more than one such cat-
egory (e.g. Bass and Digital), two can be specified.
Soft Knob
As well as being used for editing, the three VALUE knobs below
the display function as extra performance controls called “Soft
Knobs” for instant access to parameters that might otherwise
not be directly available. See also “Soft Knob (global settings)”
on page 159.
Function as...
> Off, Analog Boost Int ... Velo>Volume: Select from a list of
Soft Knob destinations.
Tip: Instead of direct control, it is fairly common to specify a
continuous controller (e.g. CC06 Data) here, then use the same
CC as source in the modulation matrix. This method not only
lets you control a wider range of destinations with the Soft
Knobs, but also allows multiple destinations with variable ranges
– complex morphing at the twist of a knob.
Name
> +3rds ... Width: Specifies a word that will appear above the
VALUE knob – try to choose the most appropriate name for
the overall effect of adjusting this knob.