Access RPSP, Installation Manual, Page: 54 / 60

53
Installation Manual – RPSP
INS-RPSP-EN-05
6 Final Checks and Verifications
All verifications indicated in the end of installation list contained below must be carried out prior to
issuance of the machine. The test list in the customer user manual must be filled out and signed
by the installer.
Failure to perform final testing can compromise system operation and terms of the warranty.
Ref. Test
RESULT
Positive Negative Value
1 Guide and anchor tests - - -
Maximum guide rotation in degrees (°)  
Guide residual deformation (mm)  
2 Strip test - - -
Strip deformation under load (mm)  
3 Safety bar test - - -
Deformation under vertical load (mm)  
Deformation under horizontal load (mm)
 
4 Speed limiter and overspeed governor test
 
-
5 Operational checks
 
-
6 Safety device check
 
-
7 Stop distance check - - -
for safety intervention (mm)
 
resulting in the interruption of the run command (mm)  
8 Manual emergency manoeuvre check
 
-
9 Any observations
System Serial Number
Test Date
Signature of technician (legible)
Installation Company