RI-130 Reader Interface Installation & User's Guide
A
DDITIONAL
F
UNCTIONS
During the reset procedure SW2 has the following functions.
Pin 7 – When ON this will cause the system code to be added in front of the card number
when cards are scanned. For example, if the card has a system code of 46 and an
encoded number of 12345, the RI-130 would return 4612345 as the card number
(which would be entered into the software as the encoded number for the
cardholder). This allows systems with multiple facilities and system codes to
combine them to form card codes which are unique across the entire system so
that cardholders that need access to multiple facilities are not required to carry
multiple cards. The only restrictions are that the raw card number on the card
must be less than 100000 (max of 5 digits in other words), and the system code
must be less than 10000 (max of 4 digits). When Pin 7 is OFF the card numbers
are reported normally.
Pin 8 – When ON this will disable the Red LED when access is not granted. When Pin 8
is OFF the Red LED will behave normally.
Page 12
©
Copyright 2009, Access Specialties International, LLC All Rights Reserved
