Manual 104-AIO16A and 104-AIO16E
11
To Install the Board
1.
Install jumpers for selected options and base address according to your application
requirements, as mentioned above.
2.
Remove power from the PC/104 stack.
3.
Assemble standoff hardware for stacking and securing the boards.
4.
Carefully plug the board onto the PC/104 connector on the CPU or onto the stack,
ensuring proper alignment of the pins before completely seating the connectors together.
5.
Install I/O cables onto the board’s I/O connectors and proceed to secure the stack
together or repeat steps 3-5 until all boards are installed using the selected mounting
hardware.
6.
Check that all connections in your system are correct and secure then power up the
system.
7.
Run one of the provided sample programs appropriate for your operating system that was
installed from the CD to test and validate your installation.
Figure 2-1:
PC/104 Key Information
