background image

Warranty Information

Accent Signage Systems, Inc. (ASSI)

Warranty Policy: 

Raster™ Pen

Accent Signage Systems, Inc. offers a full One-Year Manufacturer's Warranty from 
the date of  delivery on the Raster™ Pen.  In case of  a warranty issue: Accent 
Signage Systems, Inc. will inspect and test your Raster™Pen to determine the cause 
of  the problem.  (A nominal repair charge may be applied, depending on the cause 
of  the malfunction, if  not covered under the warranty).  

WARRANTIES AND LIMITATION OF LIABILITY:
ASSI warrants, for a period of  one (1) year from date of  delivery to the 
customer, that the Product shall be 
(i) free from defects in any material respect (including but not limited to 
materials and workmanship) and 
(ii) fit for the purpose and application as described in ASSI's product 
documentation.  
Under no circumstances shall this warranty apply to any Products that have 
been misused or tampered with by any customer.
ASSI, AS FAR AS IS POSSIBLE UNDER APPLICABLE LAW, 
EXPRESSLY DISCLAIMS ALL OTHER REPRESENTATIONS OR 
WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, 
BY OPERATION OF LAW OR OTHERWISE, WHETHER AS TO 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 
OR ANY OTHER MATTER.
No distributor is authorized to change or amend this warranty, and ASSI 
disclaims any responsibility for such misrepresentations.

Please consult the supplied pen instruction manual on troubleshooting tips for the 
Raster™ Pen before contacting us for return or repair of  any items.  For all 
warranty issues please contact us at the address and phone below:

Attn: Customer Service
Accent Signage Systems, Inc.
2322 Chestnut Avenue West
Minneapolis, MN  55405
Phone: 1-800-215-9437       

Page 10

©2005 Accent Signage Systems, Inc. All rights reserved.

TM

Raster  Method of Braille

Summary of Contents for Raster Braille












Reviews: