Accent 1400 Hardware Manual for Dedicated Devices
Page 25
Attaching a Carry Strap
The carry strap holders are located on the top and bottom of the device. At the end of each side of the
strap there is loop connector and, on the strap side, a quick-release connector.
1.
Decide whether to connect the carry strap to
the top or bottom holders on the device.
2.
Detach the loop connector from the strap by
pressing in on the sides of the quick-release
connector.
3.
Thread the loop through a strap holder on the
device.
4.
Thread the loop connector through the loop.
5.
Pull the connector through until it is tied
securely to the device.
6.
Insert the loop connector into the strap
connector until they click and hold together.
7.
Repeat these steps to connect the other end of the strap to the device.
Carry Strap Holder
