Accent 1400 Hardware Manual for Dedicated Devices
Page 11
Turning the Accent On or Off/Putting to Sleep
This section explains how to turn on the device, put the device into sleep mode and wake it, restart the
device, and power the device off. You can change the operation of the power button. For information
about setting up the power button in NuVoice, see “Managing Power Settings” on page 34.
Turning on the Accent
1.
Press and hold the power button located on the top edge of the device. When you hear a beep,
release the button. The green power LED will illuminate.
•
The LED will remain illuminated while the device is on.
•
The LED will blink when the device is in sleep mode.
2.
Wait for the NuVoice software to load. This will take about 45 seconds.
3.
First time only:
Review the NuVoice Software Agreement and select
I Agree
. The Exploration Wizard
will load.
4.
Once the Exploration Wizard loads, check the battery status level. For details, see “Charging the
Batteries” on page 12.
Putting to Sleep/Waking the Accent
When you finish using the Accent for the day, put it in sleep mode overnight. To put the device to sleep,
do either of the following:
•
Quickly press and release the power button
or
•
Select the
Sleep
key in the NuVoice Toolbox
When the device is inactive for a prolonged period, it will go into sleep mode automatically. The green
power LED will blink while the device is in sleep mode. To wake the device, do either of the following:
•
Select the Tools key on the front of the device
or
•
Quickly press and release the power button
Restarting the Accent
It is recommended that you restart your Accent once per week. To restart the device:
1.
Select the
Tools
key and then select the
Toolbox
key.
2.
Select
Maint Menu
and then select
Power Management
.
3.
Select
Restart
and then select
Yes
at the confirmation prompt.
Powering Off the Accent
When you don’t plan to use the Accent or want to store it for more than a couple days, it is best to
power off the device completely.
1.
Select the
Tools
key.
2.
Select the
Shutdown
option.
3.
Select
Yes
at the confirmation prompt.
