Accent 1400 Hardware Manual for Dedicated Devices
Page 24
Attaching or Removing a TouchGuide
Your device came with a frame mounted on it. The TouchGuide attaches to the frame. If you removed
the frame, reattach it, referring to “Removing or Replacing the Device Frame” on page 19.
Attaching the TouchGuide
1.
Align the TouchGuide so that the two squares
at the top are positioned at the upper right
corner of the display.
2.
With the bottom tabs in place, lift upward
with your fingers to bend the top right corner
of the TouchGuide slightly and insert the tab
into the top right slot of the frame.
Then insert the bottom tabs of the TouchGuide
into the slots at the bottom edge of the frame.
Note:
The TouchGuide plastic is stiff and may
require some effort to bend.
3.
Insert the left tab into the top left slot of the frame using the same method as in step 3. The
TouchGuide is now ready to use.
Removing the TouchGuide
Note:
Avoid pulling on the thin pieces of plastic.
1.
Grasp the thicker plastic above the first row of
keyholes.
2.
Pull out and down on the TouchGuide until the
upper tabs pop out.
Grasp the thicker plastic
Position squares in
upper right
Insert bottom tab
into slot
