AHARD RAID 66
8
2.5 Configuring your AHARD RAID 66
(Jumper Setting)
RAID DIP Switch Setting
RAID configurations have to be set up on AEC-6860M. And, you can set
RAID Mode by adjust enable / disable DIP switch.
Please follow the instruction below and decide your suitable RAID DIP
switch setting.
1.
Normal Mode.
Generally, when your device is using the RAID
adapter card as an extending IDE port to connect IDE hard disk or
other IDE device, you should set the DIP switch 1 and 2 as OFF.
The default value is OFF.
2.
Striping Mode (RAID 0).
RAID 0 is dedicated as pair of disk drives
that store striping data, yet appear to the computer as a single drive.
You should set the DIP switch 1 as OFF and 2 as ON, the RAID 0
mode will be actived.
Default: All OFF
Normal
Mode
1 2
ON
Striping
Mode
1 2
ON
RAID DIP
Switch
1 2
ON
