2.2 Rear Panel
1. 8/16CH Video Inputs
●
8/16 channel composite video inputs with BNC connectors. NOTE:NTSC and PAL
video sources for 8/16CH video inputs can not be mixed. If they are mixed, DVR
can’ not be operated properly.
2. 8/16CH Loop through outputs
●
8/16 channel composite video outputs with BNC connectors. If the connection of
loop-through video outputs into another video equipments is requested, 8/16CH
Loop-through outputs can be utilized for it.
3. Video Outputs: 2 BNC, 1 S-Video & 1 VGA
●
the BNS connector marked “MONITOR”, S-Video and VGA output are used for main
monitoring. The other BNC connector marked “CALL” is used for spot monitoring,
which displays all of connected video channels sequentially and pop up the channel
with event triggered.
4. 2CH Audio input (RCA) and 1CH Audio Output (RCA)
●
Audio signal input and output with RCA jack. Connect the audio source to audio
input and audio output to your amplifier because the DVR don’t amplify audio
output. A speaker with an amplifier will be needed for audio playback. The audio
input can be from an amplified source or directly from a microphone.
5. Ethernet Port
●
Connect a Cat5 cable with an RJ-45 jack to the DVR connector. Remote PC viewer
software via network enables you to access live viewing and other available
functions.
7
