4.7.3 CAMERA
Move Highlight icon to Camera in the Advanced setup menu by using UP or DOWN
button. Camera setup menu will appear after pressing ENTER button.
1) CAMERA:
CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8, ...CH16
To choose the camera to be setup.
2) CAMERA TITLE
To assign a name for a camera.
3) BRIGHTNESS:
0 ~ 31
To set the brightness of the camera display. Higher values result in increased brightness.
4) CONTRAST:
0 ~ 31
To set the contrast of the camera display.
5) HUE:
0 ~ 31
To sets the hue of the camera display.
6) SATURATION:
0 ~ 31
To set the saturation of the camera display.
7) PTZ PROTOCOL:
PELCO-P, PELCO-D
If the channel corresponds to a PTZ camera, setting the correct protocol allows control of
the PTZ camera.
8) PTZ BAUDRATE:
ON, OF
If the channel corresponds to a PTZ camera, setting the correct baudrate allows control of
the PTZ camera.
28
Picture of the CH to adjust
Would be shown here
For easier adjustment.
