3) DISK OVERWRITE:
ON, OFF
Move Highlight icon to disk overwrite in the System setup menu by using UP or DOWN
button. disk overwrite function can be set as on or off after pressing ENTER button. Use
UP or DOWN and ENTER to turn on or off the disk overwrite function. If it is set as ON,
First recorded area in HDD can be replaced with new recording data, when recording HDD
is full.
4) ACCOUNT/ PASSWORD
Move Highlight icon to Account/ Password in the System setup menu by using UP or
DOWN button. Account/ Password setup menu will appear after pressing ENTER button.
NOTE: ACCOUNT/ PASSWORD can only be accessed by Administrator while
AdminLock is set as ON and login with Admin password.
4.1) ACCOUNT:
Admin, User1, User2, User3, User4
Select the account to set the password and privileges for. One Admin and four general
User accounts are available.
4.2) PASSWORD
Set the Password for the selected account.
4.3) ACCOUNT PRIVILEGE
Set the Privilege for the selected account. Account Privilege setup menu will appear after
pressing ENTER button. Advanced Setup, Update FW, Network Video, Network Setup &
PTZ can be set as ON or OFF for the account's privilege.
NOTE: There is no need to set privilege for Administrator because of owning all
system privilege..
5) SYSTEM INFO
To show the system information including IP address, firmware version and disk capacity.
6) EVENT LOG
To enable or disable the Event Log function and also allows the user to view event logs.
7) FIRMWARE UPDATE
to Perform the firmware update function.
26
