Section2 System Appearance & Installation
2.1 Front Panel
1. Channel Selection buttons
●
Number buttons can be used to display given channel on monitor and input
password.
2. Function buttons
●
a) PTZ (Pan, Tilt and Zooming)
The camera(s) with panning, tilting and zooming function would be connected with
one and some of video inputs of DVR. In order to control PTZ function of the
camera, PTZ button should be pressed first. And then direction buttons for panning
and tilting can be pressed.
●
b) Sequential Display button
If this button is pressed, display channels would start to rotate sequentially
according to the cycle time set up in display setting menu.
NOTE: Sequential display icon would be shown on the left-up side of the monitor
after sequential display is turned on.
●
c) Display Mode Selection
Display mode selection button is pressed for switching display modes, single
picture, Quad-split, 8-split, 9-split, 16split would be switched.
●
d) Z-, Z+
Used for zoom out/ in under PTZ mode.
●
e) Save & Esc
After system setting in menu, this button is used to save the settings and escape to
upper menu.
●
f) MENU
This button is pressed to enter menu for system setting.
5
