80 Bays SAS to SAS/SATA JBOD Subsystem
54
User Manual
A.4 Zoning mode 3
When zoning mode 3 is active, there are 20 drives presented to each host port.
If the drives are accessed through subsystem Host Port 1 on either JBOD Controller
Module then the drives present in Drive Group 1 are reported. If the drives are accessed
through subsystem Host Port 2 on either JBOD Controller Module then the drives present
in Drive Group 2 are reported. If the drives are accessed through subsystem Host Port 3
on either JBOD Controller Module then the drives present in Drive Group 3 are reported.
If the drives are accessed through subsystem Host Port 4 on either JBOD Controller
Module then the drives present in Drive Group 4 are reported.
Drive
Group 4
Drive
Group 3
Drive
Group 2
Drive
Group 1
61
41
21
1
62
42
22
2
63
43
23
3
64
44 24 4
65
45
25
5
66
46 26 6
67
47
27
7
68
48 28 8
69
49
29
9
70
50 30 10
71
51
31
11
72
52
32
12
73
53
33
13
74
54
34
14
75
55
35
15
76
56
36
16
77
57
37
17
78
58
38
18
79
59
39
19
80
60
40
20
Steps:
1.
Used RS-232 Port (Phone jack to DB9) link SAS JBOD.
2.
In command line please type “phyzone mode 3”, than press “Enter”.
