ADSP 8
36
36
(2) Save as Machine Preset Data
This function saves the current working preset data to the machine (in total
6 styles can be saved). Click it and a dialog box as below in the left will appear.
Save in your selected group, click “SAVE” on a dialog box on the right. Then you
can put in a new name.
Input new name and click “SAVE”, the working preset data will be saved in the
machine in the wanted group. At the same time, the title bar shows the preset
name you saved, because the working preset data in the machine is the same to
the one you saved. See below figure:
Note:
once saved, the parameters should be adjusted again, this won’t
change the preset data you just saved (e.g. the 1st group), the current
working preset data will be changed in this machine. At the same time, the
name of the memory is not shown in the title bar of the software (e.g. the
name of saves), because the adjusted preset data is already different from
the one you just saved as preset data.
